TALVIKAMPANJA
 - Record Power puuntyöstökoneita ja tarvikkeita erittäin edullisesti! KATSO TARJOUKSET

LUE LISÄÄ
Kirjaudu sisään
Toimitusmaa

Mafell - Cross-Cutting System KSS 400

Mafell - Cross-Cutting System KSS 400
Cutting depth at 0° with guide track 0 - 49,5 mm
Cutting depth 45° with track 0 - 38 mm
Cutting depth at 0?° without guide track 0 - 55 mm
Tilt range 0 - 45 °
Cutting length 400 mm
Angle cuts -60 - +60 °
Nominal No. of strokes – no load 5200 1/min
Nominal power input 1100 W
Weight with guide rail 5,2 kg
Universal motor 230 V / 50 Hz
1 TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ 32 teeth, for fine cuts in wood Ref. 092552
1 Guide track 400 Ref. No. 204010
1 Guide bow Ref. 203208
1 Hose connector for chip extraction Ref. No. 200042
1 Allen key 5 mm Ref. No. 093034
1 Mains cable 4 m (13.1 ft) Ref. No. 087323

Tuotemerkki:    Mafell

0
0 arvostelua
0%
asiakkaista suosittelee tätä tuotetta


Mafell - Cross-Cutting System KSS 400

€ 745,50
Veroton: € 601.21
Numero: MAF916501
Toimitusaika: 2-6 Viikkoa
Saat 149.1 alennuspistettä
Lisää toivelistalle
LEASING
Kuukausierä:56.3
Leasingaika:
Loppulunastushinta:70
Vain yrityksille (vaatii Y-tunnuksen).

Laskelmat perustuu Grenke-leasing hinnastoon, joka ei sisällä vakuutusta. Vakuutus on pakollinen ja asiakas voi hankkia joko oman vakuutuksen tai ottaa sen samalla sopimuksella. Leasing-rahoitus myönnetään vain yrityksille, joilla voimassa oleva Y-tunnus.

Leasingaika 12-72 kk.

Leasinghinnat alv 0.

Mahdollisuus lunastaa lopussa omaksi loppulunastushinnalla, joka näkyy tuotteen kohdalla ja yhteenvedossa. Loppulunastushinta on minimissään 70€ alv 0.

Lähetettyäsi tilauksen leasing rahoituksella, saat 1-2 päivän sisällä sähköpostissa sopimukset sähköisesti allekirjoitettavaksi.

Mikäli haluat käyttää omaa vakuutusta, leasing-yhtiö tarvitsee vakuutustodistuksen, josta käy ilmi seuraavat asiat:

  • Yrityksen nimi
  • Vakuutussopimusnumero
  • Tieto että sopimuksella olevat laitteet on vakuutettu, tai tieto siitä että yrityksellä on omaisuusvakuutus
  • Vakuutusyhtiön nimi/logo
  • Vakuutus on voimassa / vakuutustodistuksen päivämäärä
  • Vakuutusmäärä kattaa sopimuksen arvon (kk summa x aika)
OSAMAKSU
  • Free-standing operation without a rest
  • Unique rail system
  • Plunge Cut System with FLIPPKEIL
  • Forget everything you know about portable circular saws!
  • The MAFELL KSS 400 cross-cutting system is completely different. Its novel feature is the unique guide track that not only guides the portable circular saw, but is also connected to it to form a single unit: the KSS 400 cross-cutting system.
  • It's clearly a cut above the rest. The KSS 400 cross-cutting system enables you to saw in a standing position and without a rest, with angular precision and with only one hand on the machine. Its handling is unbeatable: thanks to magnesium die-cast components, the entire system weighs only 5.2 kg (11.5 lbs).
  • Once the cut has been executed, the saw automatically returns to the starting position. The maximum cutting length, exploiting the full cutting depth, is 400 mm (15 3/4 in.).
  • The pivot point of the KSS 400 is directly aligned with the splinter guard, so that only one marking pointer is required irrespective of the angle setting, with or without a rail. The splinter guard is embedded in the rail profile and can be changed quickly and simply as required.



Nettiverstas - Instagram
Nettiverstas - YouTube
Loading...