TALVIKAMPANJA
 - Record Power puuntyöstökoneita ja tarvikkeita erittäin edullisesti! KATSO TARJOUKSET

LUE LISÄÄ
Kirjaudu sisään
Toimitusmaa

Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°

Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°

Pivoting Router Lift OFL3.0K for your Router Table

For all those who already use a Kreg inlay plate and want to change to an OFL!

The first and only one of its kind - pivoting lift from -5 to 50 degrees

The OFL3.0K - the variant in the Kreg insert plate format - for router motors with 43 mm clamping neck including swivel mechanism that only professional tables use. Solid and great workmanship. Ideal for small workshops or, due to short set-up and configuration times, also ideal next to the large spindle moulder -Genuinely Made in Germany!

Why this router lift?

  • Pivots from -5° to 50°
  • Classic snap-in points 22.5°, 30°, 45° and 90°
  • No Routing Depthloss!
  • Easiest cutter change thanks to upward looking spindle and collet chuck!
  • Innumerable routing possibilities - grooves, Rebating, chamfers, mitre cuts, etc. - all with only 1 Slot Routing Cutter!

Simple operation of the router lift

  • Height adjustment via rotary handle above.
  • Angle locking via a lever below.
  • Centering in the slotted hole by means of two levers also below.
  • Here we go.

Technical data:

  • Dimension insert plate: 298 x 235 x 9 mm
  • Corner radius Insert plate: 19.05 mm (3/4")
  • Height adjustment travel/rotation: 4 mm
  • Max. Adjustment travel: 101 mm
  • Height milling lift (max. extended): 240mm
  • Max. Cutter diameter: 55 mm
  • Weight: approx. 5 kg

Further advantages and characteristics:

  • Quality from Germany
    High quality, solid construction. Construction of high quality aluminium and steel.
  • Fine height adjustment to 1/10mm
    Height fine adjustment extremely precise adjustable, with exact scaling and effective spindle lock, conveniently operated via hexagon socket screw.
  • Smooth-running spindle columns
    Enable a stepless and exact fine height adjustment.
  • Compatible to common Routing
    The OFL3.0K is compatible with a wide range of commercially available milling motors with 43 mm Euro-neck. All models can be found below.
  • Safe Routing for any diameter
    The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the milling cutter - especially for small workpieces, a "snagging and getting stuck" on the edge of the hole eliminated!
  • Assembly made easy
    Simple mounting of the milling cutter to the mounting adapter.
  • Routing also without rip fence
    2 drill holes for the fence pin allow you to free e.fräseng. round workpieces without rip fence (see optional accessories separately - not in Delivery Includes).
  • Absolutely flat
    Simple levelling of the OFL3.0K by means of levelling screws in the insertion plate. Optionally a frame for a permanent level adjustment can be purchased.
  • No own drillings necessary
    Mounting holes (countersunk head) for quick Router Tableinstallation are already pre-drilled.
  • Lasered scaling
    Millimeter scaling on the surface for exact alignment of the rip fence.
  • Additional recessed grip for easy changing of the reduction plates.
  • Magnetism for mounting additional accessories is distributed over the entire reduction plate.

Directly compatible and approved milling motors:

  • AMB (Kress): 530 FM, 800 FME, 1050 FME
  • MAFELL: FM 800, FM 1000
  • SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAL 23 RF
    • If your motor is not listed, please check the tolerances of the clamping neck for your model as specified by the manufacturer or contact us.
      • Not released: Trend T4EK.

-----------------------------------------------------------------------------------------

Delivery Includes :

  • 1x Pivoting Router Lift OFL3.0K
  • 2x reduction plates long hole Ø 16 and 32
  • 1x reducing plate Ø 68 mm
  • 1x hexagon screwdriver 5x150 mm
  • 1x instruction manual (German)

Tuotemerkki:    Sauter

0
0 arvostelua
0%
asiakkaista suosittelee tätä tuotetta


Sauter - Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°

€ 625,00
Veroton: € 504.03
Numero: SA-OFL3.0K
Toimitusaika: 10-15 Arkipäivää
Saat 125 alennuspistettä
Lisää toivelistalle
LEASING
Kuukausierä:47.2
Leasingaika:
Loppulunastushinta:70
Vain yrityksille (vaatii Y-tunnuksen).

Laskelmat perustuu Grenke-leasing hinnastoon, joka ei sisällä vakuutusta. Vakuutus on pakollinen ja asiakas voi hankkia joko oman vakuutuksen tai ottaa sen samalla sopimuksella. Leasing-rahoitus myönnetään vain yrityksille, joilla voimassa oleva Y-tunnus.

Leasingaika 12-72 kk.

Leasinghinnat alv 0.

Mahdollisuus lunastaa lopussa omaksi loppulunastushinnalla, joka näkyy tuotteen kohdalla ja yhteenvedossa. Loppulunastushinta on minimissään 70€ alv 0.

Lähetettyäsi tilauksen leasing rahoituksella, saat 1-2 päivän sisällä sähköpostissa sopimukset sähköisesti allekirjoitettavaksi.

Mikäli haluat käyttää omaa vakuutusta, leasing-yhtiö tarvitsee vakuutustodistuksen, josta käy ilmi seuraavat asiat:

  • Yrityksen nimi
  • Vakuutussopimusnumero
  • Tieto että sopimuksella olevat laitteet on vakuutettu, tai tieto siitä että yrityksellä on omaisuusvakuutus
  • Vakuutusyhtiön nimi/logo
  • Vakuutus on voimassa / vakuutustodistuksen päivämäärä
  • Vakuutusmäärä kattaa sopimuksen arvon (kk summa x aika)
OSAMAKSU

Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
for router motors with neck holder Ø 43 mm
exact height fine adjustment & magnetic reduction plates



Nettiverstas - Instagram
Nettiverstas - YouTube
Loading...